FAQ

If your question isn't included here, feel free to reach out at contact@novavict.com.

 

What is Red Light Therapy ? (RLT)

RLT delivers specific wavelengths of light to improve the function of the mitochondria (the powerhouses of your cells).

Studies have shown it may help skin, muscle tissue, and other parts of your body.

Red light therapy is also commonly referred to as low-level laser therapy (LLLT), low-power laser therapy (LPLT), and photobiomodulation (PBM).

 

Should I wear protective eyewear ?

Eye protection should always be used when operating Nova Glow 2.0.

Do not stare directly in the LEDs.

If your eyes are sensitive to light or if you take medications that cause photosensitivity, consult a medical professional prior to use.

 

What's the difference between NIR and Red Light Wavelengths?

Both red light at 660nm and near infrared light at 850nm have been shown to enhance cellular function.

The primary difference is that NIR has been shown to penetrate deeper than red light.

Because of this:

  • Red light is better for skin issues
  • NIR is better for deeper tissues like muscle and joints.


When in doubt, we recommend using the combined mode with both NIR + Red.

 

Can the device interfere with medications?

While several studies have shown light therapy to be safe, it is important to consult with a medical professional about the medications you are using prior to operating the device.

 

Is the device safe for children?

Red light therapy has not been extensively studied in children, so it is important to check with your pediatrician or healthcare provider.

So far, the studies have not shown any concerns and it is thought to be generally safe, however, Novavict is powerful so you may need to put the device further away to reduce the light dose - check with your doctor.

 

Is Novavict registred with the FDA?

Yes, Novavict is a FDA class II device.

 

What is your return policy?

The Novavict portable device comes with an automatic 60-day return period upon receipt of the device.

If you are not satisfied with the device in the first 60 days of receipt, your device is eligible for a refund of your purchase.  Please refer to the Return section of our site for further details.

 

How do I contact Novavict?

You can reach out to us at the Contact section of our site.

 

Why doesn't Novavict offer a full body RLT device?

Based on our extensive research, we find that the majority of the users achieved their desired results using the Targeted Red Light Therapy device, in areas such as sore ankles, muscle tightness, and joint pain. 

Additionally, for personal self-care and facial skin rejuvenation, we find that Targeted Red Light Therapy is much more convenient and easier than Full Body Red Light.

 

What is irradiance, and how is it tested?

This is the most commonly asked question so it is important to provide some background.

There are many ways to achieve a false higher irradiance result, and a lot of companies out there use hand-held light meters, which are not usually very accurate. The readings may be affected by a variety of things, like the type of meter, the placement and angle between the device and testing equipment, or not using a final product for testing.

To ensure we can confidently support our irradiance numbers, Novavict tested with two separate labs. The first lab reported that irradiance for both red light and NIR were well above 150 mW/cm2. The second lab used more advanced testing equipment, in a standardized, controlled lab environment, at 1cm away from the device (not 0cm, which would again falsely give a high reading because the closer you are to the light source, the higher the irradiance). The irradiance was 140 mW/cm2 for NIR and 125 mW/cm2 for red light. Note – We also tested two other leading brands at the second lab, and their irradiance came out significantly lower than what they claim on their website. So, if irradiance is something you care about a lot – ask the company how they tested and make sure they’re not pulling the wool over your eyes.

At Novavict, we pride ourselves on rigorous, high standards, so we decided to use the measurements from the 2nd lab even though the first one gave us higher readings.

 

Does Novavict test for EMF?

Yes, we do! And we do it properly. Here's how. Testing for EMF is somewhat similar to irradiance – readings are not always accurate and affected by many external factors. This is why we decided to test for EMF in an independent lab instead of with a hand-held EMT meter. In addition, we have not found any company that reports their EMF at 0 cm from the device. Most companies report their EMF reading at 6” away – which is misleading, because distance reduces EMF, and this is how they can show a reading of 0uT, which would apply to Novavict as well.

We went one step ahead and tested the EMF in an independent lab, at 0 cm away from the device, not 6”, and it measured at 0.2uT, which is very low – common household appliances like hair dryers would be 50-100x that.

 

Does Novavict have any flicker issues?

Flicker is mainly caused by the stability level of the power supply. Generally it is a bigger concern for LED products that run on AC power. Our company operates on DC power (battery), and therefore flicker is not considered an issue. You may see mild flickering for 1-2 seconds when switching between modes but this is to be expected while the power switches between electrical circuits. This should not have any health effects unless the user tends to be hyper-sensitive.

In hyper-sensitive individuals, flickering in lighting may be associated with headaches at the workplace when exposed to long periods, particularly at lower flicker rates of less than 120hz. You’ll see companies claim they are ‘low flicker’ but this can be misleading terminology because lower flicker rates (below 60Hz) are still detectable to the naked eye. Instead, waveform and flicker index are much better measures to look for when measuring flicker rate. Thankfully, this is not necessary in a DC-run device like Novavict unlike larger AC powered panels that require wall sockets.

 

Who should NOT use Novavict device?

  • Do not use the device if you are photosensitive
  • Do not use the device if using topical, oral, or injectable steroids.
  • Do not use the device during the healing period post LASIK eye surgery.
  • Do not use the device if pregnant or lactating, users should consult their physician with any questions.

 

What to do if i have an issue or complaint with my device?

Please contact us at contact@novavict.com.